Carrier Ethernet Demarcation Device HA-805 Affordable and Seamless 1G/10G Carrier-Grade Ethernet Demarcation for Ethernet WAN and Wireless Mobile Backhaul: MEF CE2.0 Standard Based Carrier Ethernet Service, MEF 10.2 EVC Based Service Provisioning, Service Level Monitoring and Provisioning through SLA portal


Affordable and Seamless Support for Ethernet WAN and Wireless Mobile Backhaul

The HFR HA-805 is a cost-effective, multiservice, carrier-grade compact unit designed to deliver Carrier Ethernet services in support of enterprise business and wireless mobile backhaul service applications. With its small form factor (table top or wall mount), low power, temperature-resilient, and fan-less design, the HA-805 can be installed at wireless towers (outdoor-ready) or customer premises to address space and power challenges, deliver high-performance scalable services, and reduce operational costs

HA-805 is a member of the cost-effective and highly scalable Mobile Access



    Standards-based Multiservice Delivery 

    Designed to support Metro Ethernet Forum (MEF) specifications,  HA-805 delivers Ethernet Private Line, Ethernet Virtual Private Line, Ethernet LAN, Ethernet Access and Ethernet Tree based connectivity  in linear and ring topologies for high capacity business and mobile backhaul 4G services. 

    Service Level Provisioning, Monitoring and Management 

    Graphical user interfaces based on SNMP are available to provide the full range of management support - from an individual node to an end-to-end network and service-centric view. With dedicated hardware for traffic performance monitoring, the HA-805 delivers on today’s requirement for hardware-based Y.1731 latency, delay variation and frame loss ratio measurements. Tiered Ethernet services as well as wireless backhaul service level performance may also be monitored through the web-based SLA portal.



    • Mobile Backhaul (Macro / Small Cell) Service
    • Network Wholesale Service
    • Enterprise Ethernet Leased Line Service
    • Broadband Backhaul Service (G-PON / WiFi Backhaul)
    • Cloud Network Service


  • Flexible and Reliable Carrier Ethernet Service

    In spite of its compact form factor and low power, the HA-805 packs abroad range of Ethernet Service access features including demarcation, classification, traffic management, prioritization, synchronization and service inter-working with up to 40 Gbps of switching capacity. Network resiliency is provided for Ethernet services with G.8032v2.

    • SFP/SFP+ port flexibility
    • Compact, low power, and temperature resilient unit ready for tower or CPE deployment, delivers high performance and reduces operational costs
    • Standards-based MEF Carrier Ethernet 2.0 Compliance 
    • Synchronization source derived from Synchronous Ethernet interfaces or 1588v2 Ordinary Clock (Slave clock)
    • System clock meets the accuracy, stability, and holdover specifications required for stratum 3 timing (G.813)
    • Carrier-grade platform with low latency and highly reliable service delivery with sub-50ms Ethernet Ring Protection G.8032v2
    • Deep Fault and Performance Management with Y.1731, embedded RFC2544, Y.1564 SAT and CIR/EIR utilization per EVC/UNI for the Customer SLA Portal access

NID: Carrier Ethernet Demarcation Device HA-805 Applicatinos


Parameter HA-805
Base System Hardware (Fanless) Ethernet Interface - 4 ports x 1GbE SFP / 10GbE SFP+ Front LEDs for Alarms - Red : Critical, Major, and Minor, Green : for RUN Ports - Green: Link/Activity, Yellow: Speed Power Supply connectors - Terminal block for -48/+24VDC or DC Jack for +12VDC Console Port (RJ45 / RS-232c) Local LAN port (10/100Mbps, RJ45) Sync-out SMA connector - 1.544/2.048/10MHz Output & 1PPS Output SMA Connector
Clock Synchronization ITU-T G.8261 / G.8262 / G.8264 SyncE on all Interfaces SyncE Status Message support (ESMC) IEEE 1588v2 Ordinary Clock (Slave Only) Internal Stratum-3 Clock with Holdover to meet ITU-T G.813
Ethernet Switching Switching Fabric: 40 Gbps MAC Address Table: 32K Entries Jumbo Frames: 9600 Bytes 4094 Customer (C-tag) and 4094 Service Provider (S-tag) VLANs IEEE 802.1ad Provider Bridging (C-tag, S-tag)
Ethernet Services MEF CE2.0 Compliant Carrier E-LINE, E-LAN, E-TREE, and E-Access
Traffic Management Service Classification based on any fields combination of L2 to L4 MEF compliant policing (CIR/CBS/EIR/EBS) 8 Classes of Service Large CBS up to 32768KB to guarantee SLA performance levels on bursts of frames Hierarchical QoS (HQoS) MEF HBWF (Hierarchical Bandwidth Profile) support defined by MEF 23.1
Loopback Functionality Station loopback supports with Layer 1, Layer 2 (MAC Swap), Layer 3 (IP Swap) and Layer 4 (TCP/UDP Port Swap) per port and EVC Station Loopback reacts to in-band loopback requests sent from test-sets like EXFO and other test equipment IEEE 802.3ah and Y.1731 LBM OAM loopback command Latching loopback for the in-band automatic loopback request defined by MEF specification

Related Solution and Product

  • Product HA-821 Carrier Ethernet Aggregation Switch
  • Product HA-822 Carrier Ethernet Aggregation Switch
  • Solution Carrier Ethernet Solution CE2.0 approved by the Metro Ethernet Forum (MEF), designed to meet industry standards, and interoperable with Carrier Ethernet equipments from other vendors.